It retains large solid particles in order to protect H13 or H14 filter and extend its lifetime.
Average efficiency for particles of 0.4 μm: 40-60% (in accordance with EN 779).
It filters out the remaining solid particles.
• HEPA filter H13 - Efficiency for MPPS * = 99.95% (in accordance with EN 1822).
• HEPA filter H14, when extremely high air purification is required, such as clean rooms.
More efficient in particle retention MPPS * = 99.995% (in accordance with EN 1822).
* MPPS (Most Penetrating Particle Size) corresponds to the particle size at which the filter has a lower efficiency. The MPPS depends on the filter and the air flow, although usually it lies between 0.1-0.3 μm.
The active carbon filter absorbs gas molecules that the HEPA filter cannot due to size, utilizing its highly porous structure. Efficiency is enhanced by factors like lower air flow rates, allowing fumes more time to diffuse and be absorbed.
It retains large solid particles in order to protect H13 or H14 filter and extend its lifetime. Average efficiency for particles of 0.4 μm: 40-60% (in accordance with EN 779).
It filters out the remaining solid particles.
• HEPA filter H13 - Efficiency for MPPS * = 99.95% (in accordance with EN 1822).
• HEPA filter H14, it filters out the remaining solid particles and it used where extremely high air purification is required.
More efficient in particle retention MPPS * = 99.995% (in accordance with EN 1822).
* MPPS (Most Penetrating Particle Size) corresponds to the particle size at which the filter has a lower efficiency. The MPPS depends on the filter and the air flow, although usually it lies between 0.1-0.3 μm.
The active carbon filter absorbs gas molecules that the HEPA filter cannot due to size, utilizing its highly porous structure. Efficiency is enhanced by factors like lower air flow rates, allowing fumes more time to diffuse and be absorbed.
FAE operates only during soldering, activating when the tool is lifted, conserving power and extending the life of equipment and filters.
The stand features an innovative vacuum system that automatically absorbs fumes when the tool is placed in the stand, enhancing overall efficiency.
The stand features an innovative vacuum system that automatically absorbs fumes when the tool is placed in the stand, enhancing overall efficiency.
The unit has a LED warning to know when it's time to replace the pre-filter or the compact filter. If the unit is connected to a station, the warning message will also appear on the station's display.
Green |
Filter OK |
|---|---|
Yellow |
≤ 20% Carbon lifetime or about to saturate |
Red |
End of Carbon lifetime or filter saturated |
By subscribing you accept to receive JBC commercial communications. You can withdraw your consent at any time. Privacy Policy.
By subscribing you accept to receive JBC commercial communications. You can withdraw your consent at any time. Privacy Policy.
The most effective solution to avoid exposure to solder fumes
A broad variety of shapes to suit your workplace
Completely flexible arm to be adjusted to your workbench
Aspiration for up to 4 stands
FAE010
Flexible Hose Ø50 mm
This flexible extraction hose connects FAE1 or FAE2 to FAE020 or FAE070 Flexible Arm.
Lenght: 1,5 m / 59 in (unfolded)
Aspiration system for Modular Stands and Compact Stations
