Home (map of web) > Products> Advanced> Modular stations > Rework stations > 4 tools control unit DM 6700

4 TOOLS DIGITAL CONTROL UNIT

DM 6700	230V	Ref. 6700200
	120V	Ref. 6700100

Control unit featuring digital read-out that allows precise temperature and tool control. The control unit DM 6700, 4 tools, allows you to connect and work sumultaneously with all the tools.

You can connect all the tools of our Advanced range to the unit DM, always using its corresponding stand, including the desoldering iron DR5650 by adding the desoldering pumps MS 9004 (Ref.: 9004000) or MS 9005 (Ref.:9005000).

Includes all basic advantages and characteristics features in the rest of our Advanced satations.

RECOMMENDATION FOR USE

DISPLAY MESSAGES

SPECIFICATIONS:
	Power: 4 X 75W
	Total peak power 2 X 125W
	Nominal soldering iron power: 20W o 50W
	Temperature selection between 200 and 752ºF / 100 and 400 ºC.
	Antistatic control box with “skin effect”.

For a complete soldering equipment the following is needed:
	Control unit.
	1 of any iron handpiece with its corresponding stand.
	At least one cartridge that must corresponds to the selected iron.

Tools:

	Stands
	Hot Tweezers PA 4200
	Handpieces 2210 / 2245
	Micro Hot tweezer PA 1200
	AP 1300 Solder feed iron

	Manual - 100V / 120V / 230V - Last Update:07/11/2006
	Exploded view - Last Update: 30/04/2008
	Electric wiring diagram - 100V / 120V /230V - Last Update:12/06/2007
	Cartridges range

All documents are in PDF format, to view and print you need to install Adobe Acrobat Reader

Press here to download Adobe Acrobat Reader free.

JBC Rework, Soldering and Desoldering Techniques for Electronics

JBC Industrias S.A. - Ramón y Cajal, 3 - 08750 Molins de Rei (Barcelona) - Spain
Tel.: +34 93 3253200 - Fax: +34 93 6804970 - E-mail: info@jbctools.com
NIF: A-08244824
Copyright © 2007 JBC Industrias S.A.