Advanced Series JBC
Heralding a revolution

The exclusive and new JBC microprocessor driver heating system ensures such a fast heat recovery that it enables performance at temperatures lower than ever before.
With the JBC Advanced series, we have achieved a real revolution in the security and cleanliness of our stations during soldering.
We invite you to discover their outstanding performance for yourself. You can also contact any of our distributors who will be able to help you further.

Structure of the soldering system

In order to offer the highest flexibility and System to Task adaptability, the ADVANCED series is divided into modules that are supplied independently:
• Control units
• Iron handpieces models
• Hot tweezers
• Cartridge range
• Independent stands

For example:
In order to form a basic, working soldering system, an AD 2200 control unit, a hand piece and a
cartridge is needed.

By controlling the heat, we improve quality

The Advanced technology gives an 80 percent improvement over the performance of the best soldering stations available in the market. In the following graphs, based on practical tests, we show this superiority.

A- A conventional soldering station takes from 10 to 90 seconds to reach 350º C. Any Advanced station with a 20W soldering iron gets there in 2 seconds, giving you some idea of the response capability of the Advanced system.

B- Here above you can see the temperature fluctuations and time taken to perform the same series of five solder joints.
While the conventional station suffers a temperature drop of 70º C and needs 16 seconds to complete the job, the Advanced station drops off only 30º C and achieve it in just 8 seconds.

JBC Rework, Soldering and Desoldering Techniques for Electronics

JBC Industrias S.A. - Ramón y Cajal, 3 - 08750 Molins de Rei (Barcelona) - Spain
Tel.: +34 93 3253200 - Fax: +34 93 6804970 - E-mail: info@jbctools.com
NIF: A-08244824
Copyright © 2007 JBC Industrias S.A.